This type of unwinders can be used on machines that require to change the reel without stopping the machine, decreasing the speed from 30 to 15 metres according to the operator’s skills.
We offer turnkey systems, taking charge of the study and alteration of the structural part of the current machine, where the new unwinder/rewinder will be inserted, and the provision of the electrical part as well as the software, if needed.
Characteristics
- The structure can be easily inserted in line when needed (in line lamination) for then being removed.
- Tension control via pneumatic breaks.
- The rubber roll for splash can be activated with pneumatic command.
- Manual axial register.
- Spreader roll before the lamination group.
Uses and materials
These unwinders can be used in case of particular requirements such as small productions where here is a need for a … , and they can be very effective with a modest expenditure. These unwinders can be used in the sector of food packaging, in the coating of adhesive tapes, and in extrusion lines.
Safety
These products are provided with all the safeguards necessary to comply with the latest European standards and regulations, which changes are constantly monitored by our team to guarantee the safety of workers and the reputation of our clients. Examples of safeguards include: perimeter machine guards, laser scanners, sensor mat, automatic air exhaust system in knife groups. Everything is provided with an operational and maintenance manual, and certifications.
TECHNICAL DATA SHEET | |
|---|---|
Variable dimensions/features upon request | |
Reel width | 500 to 1.600 mm 19.685 to 62.99213 inches |
Max speed | 150 m/min |
Coils diameter | 800 mm / 31.496 inches |
Reel tension | from 5 kg to 50 kg |
